It is the same for all trims.
The maximum weight that Chrysler 200 is allowed to tow. The maximum trailer weights listed are only applicable for altitudes up to 3280 ft (1,000 m) above sea level. With increasing altitude the engine power and therefore the car's climbing ability are impaired because of the reduced air density, so the maximum trailer weight has to be reduced accordingly. The weight of the car and trailer must be reduced by 10% for every further 3280 ft (1,000 m) (or part thereof).
This is the maximum amount of weight Chrysler 200 is rated to carry (engine, chassis, fluids, passengers, cargo, load - everything). It is often determined by the manufacturer and is indicated in the owner's manual or on the inside of the drive's door panel.
This is how much Chrysler 200 weighs sitting on the curb with no driver, passengers, no cargo and no load with all standard options.
Payload is considered all the extra stuff you put inside your vehicle, whether it be passengers or a pile of rocks, that weight is all considered payload. You can increase it by:
The higher the power of your engine, the more weight your car can pull.
High torque is essential for towing because it allows you to pull the trailer at a lower RPM, reducing the strain on the engine.
The higher the axle ratio, the more power your vehicle produces, and as a result, the more weight this car can tow.
All-wheel or rear-wheel drive vehicles are best suited for towing, while front-wheel drive vehicles can haul much less weight.
Do not overload your vehicle while towing, as this can cause the transmission to overheat and fail. If your transmission has "Towing mode" - be sure to turn it on.
Turbocharged engines produce more power, so if you need a vehicle for towing, choose the one equipped with a turbo.
It is the same for all trims.
The longer your vehicle's wheelbase, the less likely the trailer you tow will push down on the rear axle and lift the front end.
It is the maximum allowable weight that can be placed on a front axle of your Chrysler 200.
It is the maximum allowable weight that can be placed on a rear axle of your Chrysler 200.
When preparing exhilarating excursions outside, you will need to remember the 2012 Chrysler 200 towing capacity, which is the most important feature for such adventure. The towing capacity in reality is the vehicle's highest amount of weight that it could safely tow. This info can usually be discovered on a sticker situated on the inside of the driver's door near the door latch. The gross vehicle weight rating (GVWR) is definitely the greatest operating weight (including cargo and passengers) and should not be exceeded. Generally speaking, the body weight of any trailer being pulled is suggested to be kept within 10-15 percent of the GVWR.
Down the page, we offer the data on the towing capacity of the 2012 Chrysler 200 with all trims and generations. Take note that the maximum towing weight may vary based on the braking system of what is being towed. If a trailer has its own brakes then its "braked capacity". If not, it would be unbraked capacity. When buying your RV, you need to understand that the weight and rating is obtained from the trailer's manufacturer plus all of the additional payload you will take in it needs to never go beyond the 2012 Chrysler 200 towing capacity. Violating this important guideline will affect your ability to handle and make a full stop in time and can eventually bring about long-lasting injury to your car or truck or even trigger crashes on the highways.
Select the year
The Society of Automotive Engineers (SAE) has developed the J2807 set of recommended practices. The tow test procedures designed by the big brains at the SAE consist of a series of rigorous real-world challenges to determine the Gross Combined Weight Rating (GCWR) of a vehicle and trailer combination.